Galileo ADP 3000 Quick Reference page 7

Control Panel Functions (Cont.)
To:
Ready LED on (online) and Ready LED off (offline)
Reset the printer
Select bin document type (ATB or Itinerary)
• Note: Use the [+/–] key to change the following settings
To:
Activate Answerback (Yes/No)
Adjust print alignment left margin
Adjust print alignment upper margin
Select document ejection path (Internal/External)
Select OSDP (Yes/No)
Select stock control bin 1 (Yes/No)
Select stock control bin 2 (Yes/No)
Turn Mag Encode on or off.
Note: The +/– and up/down arrow keys are reserved for maintenance use. Do not use these keys unless
instructed to do so by the Apollo Customer Support Center.
Do this:
Press MOD.
Press 7.
1. Press MOD.
2. Press 6.
3. Press up/down arrow to select bin.
Do this:
1. Press MOD.
2. Press 9.
3. Press 5.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 8.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 9.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 1.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 6.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 3.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 4.
4. Press +/–
1. Press MOD.
2. Press 9.
3. Press 2.
4. Press +/–
7