Installing The Locking Cover 3000; To Install Locking Cover; To Remove Locking Cover - Galileo ADP 3000 Quick Reference

Installing the Locking Cover 3000

The printed document locking Cover secures documents that are already printed and are waiting in the internal
stacker. Use of the printed document Locking Cover is optional. The stacker, with or without cover, holds
approximately 80 coupons.
You must remove the Locking Cover before attempting to open the right side door to clear a jam.

To Install locking Cover

1. Hold Locking Cover so lock is facing up and to the rear of printer. Open side will be facing down
toward printer.
2. Turn key clockwise (right) until it stops.
3. Line up the Locking Cover so the sides of cover slide along the guides on the front of internal stacker
until it is seated into printer housing. (See figure 1 on page 3 for location of internal stacker.)
Line up and slide down
Lock cover
Stacker on
Front of printer
4. Turn the key counterclockwise (left) to lock the cover into place.

To Remove Locking Cover

1. Turn the key counterclockwise (left) to unlock the cover.
2. Slide cover up and off of the printer housing.
3. Remove any printed documents
Lock
10