Control Panel Functions - Galileo ADP 3000 Quick Reference

Control Panel Functions

Figure 4 is a close-up of the Control Panel.
The Control Panel allows you to set or change
print operations.
Figure 4: Control Panel
To:
Adjust print alignment left or right
Adjust print alignment up or down
Clear external stacker count
Clear message buffer
Clear/Display last indicate message
Display current printer software version.
Display new error history
Display previous error history
Enter
Power printer on or off
Power Switch
Do this:
1. Press MOD.
2. Press 9.
3. Press 8.
4. Press 7 to move left or 9 to move right.
5. Press TST to print test ticket and view the change.
6. Either repeat steps 1 through 3 to readjust the
print out, or Press ENT to save settings.
1. Press MOD.
2. Press 9 twice.
3. Press 7 to move up or 0 to move down.
4. Press TST to print test ticket and view the change.
5. Either repeat steps 1 through 3 to readjust the
print out, or Press ENT to save settings.
1. Press MOD.
2. Press 0.
1. Press MOD.
2. Press 2.
Press C.
1. Press MOD.
2. Press 4.
3. Press MOD.
4. Press +/–
1. Press MOD.
2. Press TST.
Press ENT.
1. Press power switch:
O to power off..
| to power on.
6