2. How to update by DPMS
You can update the firmware by downloading the latest version from the Internet.
2.1. Connecting to the Network
(1) System requirements
•
Internet Connection by Broadband Circuit
•
Modem
•
Router
•
Ethernet cable (CAT-5 or greater recommended)
(2) Setting
Internet
Modem
Router
2.2. Checking and updating the firmware
Check if the latest firmware exists. You can also check approximately time required to complete an update.
(1) Press the "SETUP" button on the remote control to display the GUI menu.
(2) Use the cursor buttons to select "General" → "Firmware" → "Update" → "Check For Update".
(3) Press the "ENTER" button.
•
The latest version of the firmware on the website is displayed.
•
If the firmware on the website is latest, proceed to (4).
•
If the latest firmware has been already installed, press the "SETUP" button to close the menu.
(4) Use the cursor buttons to select "Start", then press the "ENTER" button.
•
During update, the power indicator lights in red and the GUI screen disappears. And an approximately remaining
time is indicated on the display.
•
When updating is complete the power indicator lights in green and normal status is resumed.
(5) Press the "MENU" button to close the menu.
--- Cautions on Firmware Update ---
• In order to update the firmware, you must have the correct system requirements and settings for a broadband Internet
connection.
• Do not turn off the power until updating is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be
completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
PC
LAN port/
To WAN port
Ethernet
connector
To LAN port
To LAN port
ETHERNET
connector
1
CBL/SAT
DVD
TV
1
2
AUDIO
COAXIAL
OPTICAL
NETWORK
DIGITAL AUDIO
IN
(ASSIGNABLE)
TRIGGER OUT
RS-232C
REMOTE CONTROL
IR
IN
STRAIGHT CABLE
DC12V 150mA MAX.
1 CBL/SAT
2 DVD
3 Blu-ray
4 MEDIA PLAYER
5 CD
FM
AUDIO
COAX.
IN
(ASSIGNABLE)
75Ω
FRONT
FRONT
AM
LOOP
ANTENNA
ANTENNA
65
HDMI
2
IN
1 CBL/SAT
2 DVD
3 Blu-ray
4 GAME
5 MEDIA PLAYER
(ASSIGNABLE)
CD
VIDEO
COMPONENT VIDEO
IN
(ASSIGNABLE)
IN
(ASSIGNABLE)
CBL/
1 CBL/SAT
1
SAT
3
Blu-ray
2
DVD
2 DVD
OUT
/C
/C
Y
P
P
B
B
R
R
CENTER
SURROUND
SURROUND
SURROUND BACK
SPEAKERS
IMPEDANCE : 6~16Ω
6 CD