Denon AVR-X3000 Service Manual page 75

3.8. About the error code
See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
Details of Error code
Code
01 Unable to detect USB.
02 No FirmwareFile in USB.
FirmwareFile in USB for
03
unsupported Model name/area
Failed to obtain entire Firmware
04
information.
TimeOut while obtaining entire
05
Firmware information
Failed to obtain individual Firmware
06
information.
TimeOut while obtaining individual
07
Firmware information
Error notification received while
08
requesting FirmwareInfo.
TimeOut while obtaining Firmware
09
information
Unable to detect USB for
0A
FirmwareDownload.
No FirmwareFile for
0B
FirmwareDownload.
Received value with invalid
0C
PackageVersion.
No UpdatePacket received from
10
DM860A (TimeOut).
Abnormal data in UpdatePacket
11 received from DM860A
(FormatError).
Abnormal data in UpdatePacket
12 received from DM860A
(CheckSumError).
Display
C o n n e c t i o n F a i l 0 1
F i l e s N o t F o u n d
N o t M a t c h F i r m
C o n n e c t i o n F a i l 0 4
C o n n e c t i o n F a i l 0 5
C o n n e c t i o n F a i l 0 6
C o n n e c t i o n F a i l 0 7
C o n n e c t i o n F a i l 0 8
C o n n e c t i o n F a i l 0 9
C o n n e c t i o n F a i l 0 A
F i l e s N o t F o u n d
C o n n e c t i o n F a i l 0 C
U p d a t i n g f a i l
U p d a t i n g f a i l
U p d a t i n g f a i l
75
Coping strategies
Disconnect and connect the USB memory.
Make sure that the FirmwareFile is in the
0 2
USB memory.
Check the supported Model name/area for
0 3
the FirmwareFile.
Start the USB Update again.
Start the USB Update again.
Start the USB Update again.
Start the USB Update again.
This unit automatically retries several times.
Wait until the FL display stops.
If the FL display stops at the Error display,
press and hold the "Power operation ( X )"
button for five seconds.
This unit automatically retries several times.
Wait until the FL display stops.
If the FL display stops at the Error display,
press and hold the "Power operation ( X )"
button for five seconds.
Disconnect and connect the USB memory.
Disconnect and connect the USB memory.
0 B
This unit automatically retries several times.
Wait until the FL display stops.
If the FL display stops at the Error display,
press and hold the "Power operation ( X )"
button for five seconds.
This unit automatically retries several times.
Wait until the FL display stops.
If the FL display stops at the Error display,
1 0
press and hold the "Power operation ( X )"
button for five seconds.
This unit automatically retries several times.
Wait until the FL display stops.
If the FL display stops at the Error display,
1 1
press and hold the "Power operation ( X )"
button for five seconds.
This unit automatically retries several times.
Wait until the FL display stops.
If the FL display stops at the Error display,
1 2
press and hold the "Power operation ( X )"
button for five seconds.