Denon AVR-X3000 Service Manual page 83

Sound mode
DIRECT/PURE DIRECT (2-channel) z 1
DIRECT/PURE DIRECT (Multi-channel) z 1
DSD DIRECT (2-channel) z 1
DSD DIRECT (Multi-channel) z 1
STEREO
MULTI CH IN
DOLBY PRO LOGIC g z
DOLBY PRO LOGIC g x
DOLBY PRO LOGIC g
DOLBY PRO LOGIC g A-DSX
DTS NEO:X
Audyssey DSX®
DOLBY DIGITAL
DOLBY DIGITAL Plus
DOLBY TrueHD
DTS SURROUND
DTS 96/24
DTS-HD
DTS Express
MULTI CH STEREO
ROCK ARENA
JAZZ CLUB
MONO MOVIE
VIDEO GAME
MATRIX
VIRTUAL
z 1, z 9 – z 13
z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z 2 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main".
z 3 This setting is unavailable when the set sound mode name contains "+PL g Music" or "+NEO:X Music".
z 4 This setting is possible when the sound mode is "Cinema" mode.
z 5 This item can be selected when a Dolby TrueHD signal is played.
z 6 This item can be selected when a Dolby Digital or DTS signal is played.
z 7 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z 8 This setting is available when the set sound mode name contains "+PL g z".
z 9 This item cannot be set when "Dynamic EQ" is set to "On".
z 10 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z 11 This item cannot be set when "MultEQ® XT" is set to "Off" or "Graphic EQ".
z 12 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z 13 In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
Surround Parameter
PRO LOGIC g / g x Music mode only
Center
Panorama Dimension
Width
S S S
S S S
S S S
NEO:X
Tone
mode only
z 9
MultEQ®
Center
XT
Gain
z 10
S S
S S
S S
S S
S S
S S
S S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
Sz 13 S
S S
S S
S S
S S
S S
83
Audyssey
Dynamic Dynamic
Audyssey
EQ Volume
DSX®
z 11 z 11
S S
S S S
S S
S S
S S S
S S S
S S
S S S
S S S
S S S
S S S
S S S
S S S
S S S
S S S
S S
S S
S S
S S
S S
S S
S S
Restorer
z 12
S
S
S
S
S
S
S
S
S
S
S
S
S
S