Combinations Of Guide Bars And Saw Chains; Stihl Mse 141 C - Stihl MSE 141 C Instruction Manual

English

22 Combinations of Guide Bars and Saw Chains

22.1 STIHL MSE 141 C
Pitch Drive link gauge/
Groove width
1/4" P 0.043 in.
(1.1 mm)
3/8" P 0.043 in.
(1.1 mm)
The guide bar and chain combinations listed above meet the 45° computed kickback angle requirement of CSA Z 62.3 when
used on this model chain saw with the matching chain sprocket listed above.
Use replacement guide bars or chains only as listed above or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of CSA Z 62.3 when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback STIHL guide bars. The listed chains are green-labeled low
kickback STIHL chains.
Since new bar/chain combinations may be developed after publication of this manual, ask your authorized STIHL servicing
dealer for the latest STIHL recommendations.
46
Length Guide Bar
10 in. (25 cm) Rollomatic E Mini
12 in. (30 cm)
14 in. (35 cm)
12 in. (30 cm) Rollomatic E Mini
14 in. (35 cm)
16 in. (40 cm)
22 Combinations of Guide Bars and Saw Chains
Number of teeth Drive link
of sprocket nose count
8 56
64
72
7 45
50
55
Saw chain
71 PM3 (Type 3670)
61 PMM3
(Type 3610)
0458-729-8221-A