Storing; Storing The Chain Saw; Cleaning; Cleaning The Chain Saw - Stihl MSE 141 C Instruction Manual

Hide thumbs Also See for MSE 141 C:
Table of Contents

Advertisement

Available languages

Available languages

English

17 Storing

17.1 Storing the Chain Saw

WARNING
Store the chain saw indoors in a dry, secure place that is
cannot be accessed by children or other unauthorized users,
@ 5.4. Improper storage can result in unauthorized use and
damage to the chain saw, @ 5.4.
When storing the saw for three months or longer:
► Remove the chain and guide bar.
► Clean and spray the guide bar with a resin solvent, such
as STIHL Resin Remover and Lubricant.
► Clean the saw, @ 18.
► Fill up the chain oil tank, @ 10.4.2.
► Store the saw indoors in a dry and secure location, out of
the reach of children and other unauthorized persons.

18 Cleaning

18.1 Cleaning the Chain Saw

WARNING
To reduce the risk of personal injury from unintended
activation, disconnect the chain saw from the power supply
and engage the chain brake before carrying out any cleaning
work, @ 8. Users of this chain saw should carry out only the
cleaning described in this manual.
To clean the chain saw:
► Clean the chain saw's plastic components with a slightly
dampened cloth. Do not use detergents or solvents. They
may damage the polymer components.
► Remove the sprocket cover and clean the area around the
chain sprocket with a slightly dampened cloth or resin
solvent, such as STIHL Resin Remover & Lubricant.
38
► Do not use a pressure washer to clean the chain saw or
spray it with water or other liquids.

18.2 Cleaning the Guide Bar and Saw Chain

WARNING
To reduce the risk of personal injury from unintended
activation, disconnect the chain saw from the power supply
and engage the chain brake before carrying out any cleaning
work, @ 8. Users of this chain saw should carry out only the
cleaning described in this manual.To help prevent injuries,
always wear heavy-duty work gloves when handling the
chain.
To properly clean the guide bar and chain:
► Remove the guide bar and the chain, @ 10.2.2.
1
► Clean the oil outlet duct (1), oil inlet bore (2) and groove
(3) with a brush, a slightly dampened cloth or resin
solvent, such as STIHL Resin Remover & Lubricant. Do
not use detergents.
► Clean the chain with a brush, a slightly dampened cloth or
resin solvent. Do not use detergents.
► Do not use a pressure washer to clean the guide bar or
chain or otherwise spray them with water or other liquids.
17 Storing
3
2
3
0458-729-8221-A

Advertisement

Table of Contents
loading

Table of Contents