Siemens 3VF Series Communications Manual page 40

Communication System Manual
Message group 1
T-Nr. Designation
1:x Circuit-breaker
functions
(See pages 41 - 51 for
details)
x =
0 Switching actions
1 Circuit-breaker
state
2 "Tripped" signals
3 Warning signals
5 Processor status
8 Fault signals
11 - Operational data
51
61 - Setting values/
108 Protection
parameters
111 - Additional
112 functions (1 and 2)
Note: When using releases N or P, the communication module with measurement functions should be
ordered (order supplement Z=F05 in 3WN6 order number) instead of the standard communication module
(Z=F01).
22)
See pages 41 - 51 for details of addressing.
40
Message Value range
address
Releases
N and P
22)
721, ...
22)
741, ...
22)
742, ...
22)
743, ...
22)
745, ...
22)
748, ...
22)
762 - 773
22)
782-792
write depending on version of release unit
22)
812, 820 Read and write (on = 1/off = 0); write depending on version
© Copyright Siemens AG 1998. All rights reserved.
Value range
Releases
H and J/K
Write only (on = 1/off = 0)
Read only (on = 1/off = 0)
Read values only
Read and write (set) values;
3WN6 Circuit-Breakers
Value range
Releases
D and E/F
Version1.0 (05/98)