Siemens 3VF Series Communications Manual page 104

Communication System Manual
The interface module has been tested in accordance with the tests, standards and specifications outlined in
the following table.
Table 15 Tests, standards and specifications
No.
1 Vibration test
2 Shock test
3 Drop test
4 Bending and draw-out test
5 Climatic test:
6 Pollutant concentration
7 ESD
8 Electromagnetic fields
9 Burst
10 Emitted interference
11 Approvals
12 Standards, specifications
13 Siemens standards
104
Parameter
• 5 Hz ≤ f ≤ 26 Hz, amplitude =
0.75 mm
• 26 Hz ≤ f ≤ 500 Hz, acceleration =
20 m/s
à
à
• Shock form = half sinusoidal
• Acceleration = 15 g (150 m/s
• Duration of shock = 11 ms
à
• Screw size: M3
• Wire cross-section: 0.75/1.5/2.5 mm
• Wire type
• 0 °C/16 h
- Cold
• 60 °C/16 h
- Dry heat
• -25 °C ... 55 °C, 1 °C/min, 2 cycles
- Change of temp.
• 55 °C, 90 ... 95 %, 12+12h, 2 cycles
- Damp heat
• SO2 < 0.5 ppm; rel. humidity < 60 %
• H2S < 0.1 ppm; rel. humidity < 60 %
2 kV/5 kHz supply voltage
2 kV/5 kHz data cables
• UL
• CSA
• CE mark
• PROFIBUS certification
• DIN 40050; IEC 529
• VDE 0106, protection class 3
• VDE 0160, where applicable
• VDE 0110 - insulator group IIIa, IIIb
• IEC 68
• IEC 721-3-1/-3
• IEC 1131-2
• IEC 1000-4-2/-3/ -4/ -5/ -6
• EN 55011, DIN VDE 0875-11
• EN 50022
• EN 61131-2
• UL 508
• CSA 22.2-14
• SN 18013
• SN 18012
• SN 36350
• SN 31205
© Copyright Siemens AG 1998. All rights reserved.
Data
2
Frequency sweep: 1 octave/min
10 freq. sweeps each in x, y, z
2
3 shocks in +/- direction in x, y, z
1m high
--> tightening torque: 0.5 ... 0.8 Nm
AWG: 18/16/14
: rigid, flexible
8 kV discharge in air
6 kV contact discharge
10 V/m
Limit class A
- pollution severity 3
3WN1, 3WS1 Circuit-Breakers
Description
ð
SN 31205
(IEC 68-2-6-Fc sinusoidal)
(= utilization category: 3M6/1M4)
ð
SN 31205 (IEC 68-2-27-Ea)
(= utilization category: 3M6/1M4)
)
ð
SN 18013
ð
IEC 947-1 (screw connections)
2
ð
SN 31205 (IEC 68-2- 1-Ad,
IEC 68-2- 2-Bd,
IEC 68-2-14-Nb,
IEC 68-2-30-Db)
(= utilization category: 3K6/1K6)
ð
SN 31205 (IEC 68-2-60)
(= utilization category: 3C3/1C2)
ð
No condensation
IEC 1000-4-2 Severity 3
IEC 1000-4-3 Severity 3
IEC 1000-4-4 Severity 3
EN 55011
ð
Underwriters Laboratories
ð
Canadian Standards
Association
ð
Certificate of conformity from
ð
PROFIBUS user organization
ð
IP degrees of protection
ð
Shock protection, protective
separation
ð
Power installations
ð
Insulation coordination
ð
Env. conditions: Meas. methods
ð
Env. conditions: Definitions
ð
PLC interface standard
ð
EMC requirements
ð
EMC emissions
ð
Standard DIN rail
ð
PLC I/O modules
ð
UL for indust. control systems
ð
CSA for industrial equipment
ð
Packaging and drop test
ð
Labeling of packaged items
ð
Recycling guidelines
ð
Environmental conditions
Version 1.0 (08/98)