Selection And Ordering Data - Siemens 3VF Series Communications Manual

Communication System Manual

2.1.5 Selection and ordering data

The possible combinations for communication-capable 3VF circuit-breakers (40 kA, 415 V, 3-pole, fixed-
mounted) are listed with their order numbers in the table below. This will help you to quickly locate the
most economical solution for the specified bus functions based on the prepared order numbers. The
hardware and software required in addition to the circuit-breaker must be ordered separately.
Measuring Circuit-breaker,
range release "an",
with HS and AS
25 - 100 A 3VF3 111-1BQ41-0AN1
50 - 200 A 3VF3 311-1BX41-0AN1
125 - 250 A 3VF4 211-1BM41-0AN1
125 - 400 A 3VF5 211-1BM41-0AN1
125 - 500 A 3VF6 211-1BK44-0AN1
200 - 630 A 3VF6 211-1BM44-0AN1
200 - 800 A 3VF7 111-1BK60-0AN1
Note:
Standard circuit-breaker and SIMOCODE-DP devices are used for the purposes of the overview. These
can be controlled directly from SIMOCODE-DP in the case of motorized operating mechanisms with a
rated voltage of 230 V.
If control voltages < 230 V are required for motorized operating mechanisms, additional auxiliary
contactors (relays) must be used, as the relay contacts of SIMOCODE-DP (max. load rating 5 A)
can be overloaded or damaged due to the increased current input.
Version 1.0 (05/98)
Motorized op. mech.
for ON/OFF
220 - 240 V AC
3VF9 323-1ME10
3VF9 323-1ME10
3VF9 423-1ME10
3VF9 523-1ME10
3VF9 623-1ME10
3VF9 623-1ME10
3VF9 723-1NE30
© Copyright Siemens AG 1998. All rights reserved.
3VF Circuit-Breakers
SIMOCODE-DP
(230 V AC)
3UF5021-3BN00-1
3UF5031-3BN00-1
3UF5041-3BN00-1
3UF5041-3BN00-1
3UF5041-3BN00-1
3UF5051-3BN00-1
3UF5051-3BN00-1
17