Technical Data - Nilfisk-Advance SR 1500H B Use And Maintenance Manual

USE AND MAINTENANCE MANUAL

TECHNICAL DATA

Dimensions
Machine length
Machine width (with one side brush)
Front - rear wheelbase
Track (centres of front wheels)
Maximum height
Seat level height
Minimum ground clearance (excluding skirts)
Maximum climbing angle
Maximum debris discharge height above
ground level
Cleaning width (with side brush)
Cleaning width (with two side brushes)
Minimum turning circle (external)
Front drive wheel dimensions
Rear steering wheel dimensions
Main brush diameter – length
Side brush diameter
Total machine weight in running condition
Total weight at full load with operator (80 Kg)
Performance
Maximum forward speed
Maximum slope at full load
Maximum speed of main brush
Maximum speed of side brush
Surface area of closed pocket filter
Noise level at driver's position
Waste container capacity
Electrical motors
Traction and services:
– Power
– Speed
Suction fan:
– Power
– Speed
Filter-shaker:
– Power
– Speed
Capacity
Hydraulic oil tank
Total hydraulic system
6
Electrical System
System voltage
Values
Battery
2,250 mm
1,400 mm
Hydraulic System
1,060 mm
Maximum traction system pressure
1,114 mm
Maximum service system pressure
1,481 mm
Hydraulic oil viscosity (at temperatures above
1,154 mm
10°C)
66 mm
16°
1,450 mm
1,150 mm
1,450 mm
1,950 mm
4.00 - 8
Wiring diagram
4.00 - 8
Wiring diagram, see fig. X.
330–900 mm
Key
480 mm
BAT:
1,280 Kg
C1:
1,560 Kg
ES0:
ES1:
Values
ES2:
EV1:
8 Km/h
FA:
22%
FP:
400 rpm
F1:
80 rpm
F2:
2
8.5 m F3:
F4:
78 dB (A)
F5:
350 Litres
F6:
F7:
Values
F8:
HM:
HN1:
4,000 Watt
K1:
2,200 rpm
L1/2:
M1:
600 Watt
M2:
M3:
3,600 rpm
M4:
M5:
110 Watt
P1:
3,000 rpm
P2:
RT1:
R1:
Values
SW1:
15 Litres
SW2:
20 Litres
SW3:
SW4:
SW5:
SW6:
SW7:
NOTE
If the machine is to be used at temperatures
below 10°C, the oil should be replaced with
similar oil that has a viscosity of 32 cSt. For
temperatures below zero, use an oil with an
even lower viscosity.
36V batteries
Battery connector
Starting relay
Hydraulic pump electromagnetic switch
Suction motor electromagnetic switch
Left brush solenoid
Suction fuse (50 A)
Primary fuse (160 A)
Relay fuse (10 A)
Right side brush actuator fuse (10 A)
Acoustic warning signal fuse (10 A)
Filter-shaker fuse (30 A)
Starting fuse (10 A)
Pivoting light fuse (10 A)
Working lights fuse (10 A)
Left brush fuse (10 A)
Hour counter and battery charge status display
Horn
Ignition key
Working lights
Hydraulic pump
Suction motor
Right side brush actuator
Filter-shaker motor
Left side brush actuator
Acoustic warning signal push-button
Filter-shaker push-button
Voltage reduction unit 36 - 12 V
Starting relay resistor
Emergency switch
Suction switch
Right side brush motor switch
Pivoting light switch
Working light switch
Left side brush motor switch
Solenoid micro-switch
146 1633 000(3)2004-05 A
Values
36 V
36 V - 360/400 Ah
Values
200 Bar
150 Bar
68 cSt