Indicator Status - Honeywell FF-SPS4 Series Installation Manual

Indicator Status

Refer to table 1-1 for indicator status.
1. If both yellow LED indicators (signal margin/reset mode) are illuminated, the receiver is not
2. If the signal margin indicator flickers and the reset mode indicator is illuminated, the optical
3. If both yellow indicators (signal margin/reset mode) flicker, the optical signal is close to the
4. If the signal margin indicator is not illuminated and the reset mode indicator is flickering,
5. If the signal margin indicator is not illuminated, and the reset indicator is illuminated, the
Table 1-1 Alignment Indicators
107063-11 EN FR26 GLO 800 Printed in France
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
receiving light (an optical signal) from the emitter. Align the emitter and receiver.
signal is too weak for the perimeter device to operated correctly. Continue to align the
emitter and receiver.
limit. The receiver is receiving enough of a signal to operate correctly. However, continue
to align the emitter and receiver for optimum performance.
the alignment is correct. Press and release the push-button within the correct time frame
(100 ms < t < 3,4 s).
device is 100% aligned and operating correctly.
Receiver Indicator Status Optical Signal Relay Status
signal absent de-energized,
open
signal too weak de-energized,
open
signal close to de-energized,
the limit open
signal sufficient de-energized,
open
signal sufficient energized,
closed
Action
align emitter and receiver
continue to align emitter
and receiver; cannot
reset
continue to align emitter
and receiver; cannot
reset
optimal alignment (can
reset). press and release
reset push-button within
time frame t; (100 ms < t
< 3,4 s)
100% aligned and reset;
final optimum operating
condition
9