Honeywell FF-SPS4 Series Installation Manual page 44

a) Install the brackets and the sensors without tightening the screws, and supply the units
b) Put the laser pen in the location notch of the emitter unit. The two positioning rings must be in
c) Put the target behind the receiver unit.
d) Adjust the emitter in such a way that the laser red spot appears in the area of the receiver
e) Repeat the same operations with the laser pen on the receiver unit and the target behind
f)
The same procedure can be used when individual deflection mirrors FF-SPZ01MIR are
involved. These are delivered with the correct target which indicate the position of the laser red
spot for a correct adjustment of the mirror.
107063-11 EN FR26 GLO 800 Printed in France
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Laser pen
Emitter
with the correct power to supply the front panel indicators (refer to § 6.2 and § 6.3).
the location notch (refer to § 3.6).
location notch.
the emitter unit.
Secure the adjustment by tightening the screws.
Target
Receiver
FF-SPR
Target
Backsight
notch
37