Riello RS 70 E Installation, Use And Maintenance Instructions page 23

Once the combustion head adjustment is completed:
 slide the burner on the guides 3) at about 4" from the pipe
coupling 4) - burner in the position shown in Fig. 11;
 insert the electrode cable, then slide the burner as far as the
pipe coupling - burner in the position shown in Fig. 18;
 fix the burner to the pipe coupling with the screws 1).
D7975
Installation
When fitting the burner on the two guides, it is ad-
visable to gently draw out the high voltage cable un-
til they are slightly taut.
CAUTION
21
Fig. 17
20017786