Riello RS 70 E Installation, Use And Maintenance Instructions page 16

Technical data
LMV37.4... basic unit Mains voltage
Mains frequency
Power consumption
Safety class
Terminal loading Unit fuse F1 (internally)
'Inputs'
Perm. mains primary fuse (externally)
Undervoltage
• Safety shutdown from operating position
at mains voltage
• Restart on rise in mains voltage
Terminal loading
Total contact loading:
'Outputs' • Nominal voltage
• Unit input current (safety loop) from:
- Fan motor contactor
- Ignition transformer
- Valves
- Oil pump / magnetic clutch
Individual contact loading:
Fan motor contactor
• Nominal voltage
• Nominal current
• Power factor
Alarm output
• Nominal voltage
• Nominal current
• Power factor
Ignition transformer
• Nominal voltage
• Nominal current
• Power factor
Fuel valves
• Nominal voltage
• Nominal current
• Power factor
Operation display
• Nominal voltage
• Nominal current
• Power factor
Cable lengths Mains line
Display, BCI
External lockout reset button
Environmental Operation
conditions Climatic conditions
Mechanical conditions
Temperature range
Humidity
20017786
Technical description of the burner
14
AC 120 V -15 % / +10 %
50 / 60 Hz ±6 %
< 30 W (typically)
I, with parts according to II and III to DIN EN 60730-1
6.3 AT
Max. 16 AT
Approx. AC 93 V
Approx. AC 96 V
AC 120 V, 50 / 60 Hz
Max. 5 A
AC 120 V, 50 / 60 Hz
1.6 A pilot duty load declaration to UL372
cos  > 0.4
AC 120 V, 50 / 60 Hz
1 A
cos  > 0.4
AC 120 V, 50 / 60 Hz
1.6 A pilot duty load declaration to UL372 or 250 VA ignition
load declaration to UL372
cos  > 0.2
AC 120 V, 50 / 60 Hz
1.6 A pilot duty load declaration to UL372
cos  > 0.4
AC 120 V, 50 / 60 Hz
0.5 A
cos  > 0.4
Max. 100 m (100 pF/m)
For used outside the burner cover or the control panel:
Max. 3 m (100 pF/m)
Max. 20 m (100 pF/m)
DIN EN 60721-3-3
Class 3K3
Class 3M3
-20...+60 °C
< 95 % r.h.
Tab. I