Mitsubishi Electric MELSEC iQ-R Series User Manual page 94

Recommended optional items
To perform the module wiring easier, the following products are prepared as optional items.
■Connector/terminal block converter module and dedicated cable with connector
Used for the easy wiring from a connector type I/O module to an external wiring terminal block.
Page 129 Connector/terminal block converter modules
■Relay terminal module and dedicated cable with connector
Used as a substitute for the relay terminal blocks and relays in a control panel, which reduces the man-hours for wiring among
the programmable controllers, relay terminal blocks, and relays.
For details on the relay terminal module and dedicated cable with connector, refer to the following.
 Relay Terminal Module User's Manual (Hardware) A6TE2-16SRN
■Spring clamp terminal block
Used by mounting it on a terminal block type I/O module. The man-hours for wiring can be reduced considerably because the
screw tightening is not required in wiring.
For details on the spring clamp terminal block, refer to the following.
 Before Using the Product (BCN-P5999-0209)
5 SYSTEM CONFIGURATION
92
5.1 System Configuration