Spring Clamp Terminal Block (Lever Type) - Mitsubishi Electric MELSEC iQ-R Series User Manual

Spring clamp terminal block (lever type)

Precautions
• Use bar solderless terminals for wiring to the terminal block. If a stripped wire is inserted into a wire insertion opening, the
wire cannot be securely clamped.
• For how long the wire should be stripped, follow the specifications of the bar solderless terminal used. To attach a bar
solderless terminal to a wire, use a crimping tool.
List of bar solderless terminals
The following table lists recommended bar solderless terminals.
Product name
Bar solderless With insulation
terminal sleeve
Without insulation
sleeve
Bar solderless terminal tool
6 INSTALLATION AND WIRING
106
6.2 Wiring
Model Applicable wire
size
AI0.34-10TQ 0.34
AI0.5-10WH 0.5
AI0.75-10GY 0.75
A0.5-10 0.5
A0.75-10 0.75
A1-10 1.0
A1.5-10 1.5

CRIMPFOX6
Length of Contact
peeling
12mm PHOENIX CONTACT GmbH & Co. KG
13mm
13mm
10mm
10mm
10mm
10mm