Sony LMD-X2705N Instructions For Use Manual page 8

Guidance and manufacturer's declaration – electromagnetic immunity
The LMD-X2705N/X2700N is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of
the LMD-X2705N/X2700N. Otherwise, degradation of the performance of this equipment could result.
Immunity test
380 – 390 MHz
430 – 470 MHz
704 – 787 MHz
800 – 960 MHz
Proximity fields
from RF wireless
communications
equipment
IEC 61000-4-3
1,700 – 1,990 MHz
2,400 – 2,570 MHz
5,100 – 5,800 MHz WLAN 802.11 a/n
NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
a For some services, only the uplink frequencies are included.
Band a Service
TETRA 400
GMRS 460
FRS 460
LTE Band 13, 17
GSM 800/900
TETRA 800
iDEN 820
CDMA 850
LTE Band 5
GSM 1800
CDMA 1900
GSM 1900
DECT
LTE Band 1, 3, 4,
25
UMTS
Bluetooth
WLAN
802.11 b/g/n
RFID 2450
LTE Band 7
a Modulation
Pulse modulation
18 Hz
FM
±5 kHz deviation
1 kHz sine
Pulse modulation
217 Hz
Pulse modulation
18 Hz
Pulse modulation
217 Hz
Pulse modulation
217 Hz
Pulse modulation
217 Hz
8
IEC 60601
Compliance level
test level
27 V/m 27 V/m
28 V/m 28 V/m
9 V/m 9 V/m
28 V/m 28 V/m
28 V/m 28 V/m
28 V/m 28 V/m
9 V/m 9 V/m