Adjustment Using The Menus; Items - Sony LMD-X2705N Instructions For Use Manual

4
Press the / button to select the tab.
The selected tab is shown in blue, and
setting items of the selected tab appear.
5
Select an item.
Press the / button to select the item.
The item to be changed is displayed in blue.
6
Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the  button.
To decrease the number, press the  button.
When selecting the setting:
Press the / button to select the setting.
If the Control Lock is set to "On," the setting
cannot be changed.
For details about Control Lock, see page 26.
To hide the menu
Press the MENU button.
The menu disappears automatically if a button is
not pressed for one minute.
To hide the operation buttons
Press the CONTROL button.
About the storage of the settings
The adjusted settings are automatically stored in
the monitor memory.
For details on settings for the next power-on,
refer to "Power On Setting" in (page 27) the
System Configuration menu.
About the control navigation
Depending on the state, the operation buttons of
the unit light as shown below:
White light: Operable state.
Green light: Operating state.
Off: Unable to operate.

Adjustment Using the Menus

Items

The screen menu of this monitor consists of the
following items.
Color Tone Adjustment (page 24)
Gamma
Phase
Chroma
Brightness
Contrast
Color Temperature
Gain R Offset
Gain G Offset
Gain B Offset
Bias R Offset
Bias G Offset
Bias B Offset
Mono
Sharpness H
Sharpness V
RGB Range
Color Space
Screen Control (page 24)
4K Scan Size
HD Scan Size
SD Scan Size
Flip Pattern
SD Aspect
HDMI Signal Format
PIP / POP (page 25)
Clipping Size
Sub Screen Position
Pattern Skip
Input/Output Configuration (page 25)
Port A Input Select
Port B Input Select
Input Name
Power Supply
HDCP Setting
Auto Input Select
System Configuration (page 26)
Control Lock
23