Making Machine Settings From An Application; Printer Properties Settings - Ricoh 80 Series Operating Instructions Manual

Making Machine Settings from an Application

To make the machine settings for a specific application, open the [Print] dialog
box from that application. The following example describes how to make set-
tings for the WordPad application that comes with Windows 2000/Windows
XP.
Note
❒ The actual procedures you should follow to open the [Print] dialog box may
vary depending on the application. For more information, see the documen-
tation that comes with the application you are using.
❒ Any settings you make in the following procedure are valid for the current
application only.
A A A A
On the [File] menu, click [Print].
The [Print] dialog box appears.
B B B B
Select the machine you want to use in the [Select Printer] box.
C C C C
Make any settings you require and click [Print] to start printing.

Printer Properties Settings

In this section, the Job Separator and Sort functions which are peculiar to this
machine are explained. For other functions, see the documentation that comes
with Windows 2000/Windows XP or Help.
Note
❒ As the PCL printer driver is Microsoft's mini driver that belongs to the oper-
ating system, the items that can be set are few, compared to the PostScript 3
printer driver.
❖ ❖ ❖ ❖ "Job Separator"
When "Job Separator" is set, classifying will occur whenever the document
data changes.
❖ ❖ ❖ ❖ "Sort"
When "Sort" is set, it is possible to deliver each print set in page order into
the optional sorter.
Windows 2000/Windows XP
2
45