Ricoh 80 Series Operating Instructions Manual page 14

PostScript 3 - Setting Up for Printing
Printing on paper with a nondetectable size
This machine automatically detects the paper size, however, there are cases
where the machine cannot detect the size depending on the paper size. In these
1
cases, follow the procedure below and manually make the desired settings.
Note
❒ When using this function, make sure to set it in the [Print Size def.] in the [Set
O/L Paramet's
A A A A
Press the { { { { Online} } } } key on the machine.
B B B B
Press [Pnt.Size].
Note
❒ [Pnt.Size] is only displayed when the machine is online. It will not be dis-
played when the machine is offline.
C C C C
Select the paper size, and then press [OK].
Important
❒ Select a size that is bigger than the contents to be printed. If the contents
are bigger than the size selected and the data is printed, it will, for example,
cause the roller to get dirty.
D D D D
Select the paper size on the computer's printer driver.
Important
❒ Select the same paper size selected in the [Pnt.Size] setting on the machine.
E E E E
Start printing on the computer.
8
1
] of the machine's Online Parameter Settings.
/
3