Setting The Delayed Start Cooking Time; To Check Or Cancel Settings; On Completion Of Cooking; Select The Oven Function - Westinghouse WVE613 User Manual

USING YOUR OVEN (CONTINUED)
3. Enter the time of day to finish cooking by pressing
or symbols while the
is flashing.
4. After 5 seconds from the last change, the
indicator symbol
time of day will be displayed.

Setting the delayed start cooking time

1. Program the
in the relevant sections. Once both the
and
indicators will stop flashing and the current
time of day will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.

To check or cancel settings

1. To check your settings, press
indicator symbol flashes next to the mode
( ,
After 5 seconds from the last change, the indicator
will stop flashing and the time of day will be
displayed.
2. To cancel "delayed start", press
indicator symbol flashes next to
hold and
of day is displayed.
3. To cancel a setting, press
symbol flashes next to the setting to be cancelled.
Press and hold
setting is cleared.

On completion of cooking

When the set time has elapsed, the oven will turn off,
the timer will beep and the
indicators will flash.
1. Turn the
off position.
2. Press or symbols or
from beeping.
Switching the clock display ON and OFF
1. Press together
switch off the display.
2. Press together
switch the clock display on again.
NOTE: If a timer mode is set, then it is not possible to
switch the display off.
22
USING YOUR OVEN
indicator symbol
will stop flashing and the current
and as described
have been set, the
until the
etc) that you want to display.
until the
symbols together until the current time
until the indicator
and symbols together until the
and/or
and controls to the
to stop the clock
and symbols for 3 seconds to
and symbols for 3 seconds to
Operating the Electronic Clock
(WVEP615, WVEP627, WVEP617)
Before the appliance can be used, the time must be set.
and
When power is supplied to the oven the
be displayed. Along with the clock symbol the '12' will be
flashing. This indicates that 'hour' portion of the time is
ready to be changed.
Toggle the temp selector
. Press and you have the right hour.
The minutes will flash and can be set in the same manner.
5 seconds after the last change, the clock display will stop
flashing, confirming that the time has been set.
NOTE: The clock has a 24 hour display.

Select the oven function

Turn the oven function selector clockwise to select the
desired oven function.
NOTE: each oven function has a default temperature
which can then be adjusted as outlined below.
clock icon will
or , then touch when
This knob cannot be
turned anticlockwise
from off position