Installing Your Oven Accessories; Slides (Telescopic Runners); Side Racks; Shelves And Trays - Westinghouse WVE613 User Manual

INSTALLING YOUR OVEN ACCESSORIES

Slides (Telescopic runners)

1. Obtain left hand side rack and left hand slide – see
image to identify.
2. The shaded wires indicate the wire the slide can be
mounted on. Fit slide rear clips to the rear of wire at
an angle as shown below.
3. Push slide front clip over wire until secured
CLICK!
CLICK!
CLICK!

Side racks

• The side racks attach to each side of your oven.
There is a left hand and right hand version (see image
below for details).
• Insert the rear peg into the rear access hole provided,
ensuring that the peg is fully inserted.
• Then locate the front peg into the front access hole
and push in firmly.
• For the grill compartments on WVE626, WVE665,
and WVEP627 models, the side rack fitment is the
same as above.
Front Peg
L = left hand side
R = right hand side
L = left hand side
R = right hand side
L = left hand side
2
R = right hand side
1
2
1
2
1
3
3
3
Rear Peg
Left hand side rack

Shelves and trays

The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
To fit a shelf to side racks:
NOTE: To Locate the rear edge of the shelves, the detents
on the side wires should be towards the oven back wall.
See image.
1. Rest the rear edge of the shelf on the lower guide rail
of the side rack - see diagram. Ensure the same rail
positions on both sides of the oven are being engaged.
2. With the front edge raised, begin to slide the shelf in
between the guide rails of the side rack.
3. Once the detents have passed the front edge of the
side rack, the shelf can be pushed fully in.
4. When fully inserted the shelf should not interfere with
the closed oven door.
INSTALLING YOUR OVEN ACCESSORIES
Detent
15