Network Components - Toshiba V Series Manual

Chapter 3 Preparations for Operation (Hardware)

3.6 Network Components

3
40
This section explains the network components of the DeviceNet other than the master/
slave devices (Figure 3-16). Recommended peripheral devices are introduced on the
following pages for you to purchase as necessary. For detailed information on them, ask
their manufacturers.
Node
Node
Multiport tap
Node
Node
Terminator
Node
Node
Figure 3-16 Example of DeviceNet Network Configuration
(1) Thick Cable (for trunk line)
Manufacturer: Rockwell Automation
Item name
1 m with connectors 1485C-P1N5-M5
2 m with connectors 1485C-P2N5-M5
3 m with connectors 1485C-P3N5-M5
5 m with connectors 1485C-P5N5-M5
10 m with connectors 1485C-P10N5-M5
50 m without connector 1485C-P1-A50
150 m without connector 1485C-P1-A150
300 m without connector 1485C-P1-A300
(2) Thin Cable (for trunk line and drop line)
Manufacturer: Rockwell Automation
Item name
1 m with connectors 1485R-P1M5-C
2 m with connectors 1485R-P2M5-C
3 m with connectors 1485R-P3M5-C
150 m without connector 1485C-P1-C150
300 m without connector 1485C-P1-C300
600 m without connector 1485C-P1-C600
Trunk line
Tap
Tap Multiport tap
Node
Node Node
Catalog No.
1485C-P1N5-M5 Shielded mini-connectors
(male, female) attached
Shielded mini-connector (male) at one end,
shielded mini-connector (female) at the other
end
Shielded mini-connectors, 871A-TS5-NM3
(male) and 871A-Ts5-N3 (female) to be
attached later
Catalog No.
Shielded mini-connector (male) at one end
and a discrete end at the other for open-type
connector
Used for daisy-chain connection from one
open-type connector to another. Used for
connecting DeviceBox Tap to an open-type
connector
model 3000 DeviceNet Module Manual (DN311/DN311A)
Terminator
Tap
Node
Node
Node
Drop line
Node
Remarks
Remarks