Summary of Contents for Argos HOME New Pagnell 3 Dr 4 Drw Wardrobe 605/8788
Page 1
Width - 114.5cm Depth - 54.5cm Height - 180.5cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800 Version 1 Date: 08/11/16...
Page 2
IMPORTANT: RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE • Argos Ltd. MK9 2 NW. • This product is intended for • Assembly of this product must children in the age 6 or above.
Page 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the panels listed below Shelf x 2 (49.8 x 36.7cm) Finished front edge Top panel (114.6 x 54cm) Front bottom panel (111.2 x 11cm)
Page 4
Components - Panels If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the panels listed below Large drawer front panel x 2 (72.4 x 14.5cm) Large drawer bottom panel x 2 (70.7 x 33.6cm)
Page 5
Components - Fittings Note: The quantities below are the correct amount to complete the assembly. In some cases mor may be supplied than are required. (This screw is included in the bag of runner) Runner x 8 12mm Screw x 24 Door hinge x 9 (This screw is included in the door hinge bag)
Page 6
Assembly Instructions Step 1 Middle hole Attaching runners and hinges Position Runners front edge of the Right 1.7cm side panel Slide top of the Runners back. Runners on the Right side panel The front part of Note: the runner should be approximately 1.7cm from the front edge of the panel.
Page 7
Assembly Instructions Step 1 - continued Middle hole Position Runners front edge of the Left side panel Slide top of the Runner 1.7cm back. Runners on the Left side panel Note: The front part of the runner should be approximately 1.7cm from the front edge of the panel.
Page 8
Assembly Instructions Step 1 - continued Middle hole Position Runners front edge of the Center panel 1.7cm Slide top of the Runners back. Runners on the Center panel The front part of Note: the runner should be approximately 1.7cm from the front edge of the panel.
Page 9
Assembly Instructions Step 1 - continued Middle hole Position Runners front edge of the Center panel Slide top of the Runners back. 1.7cm Runners onto the Center panel The front part of Note: the runner should be approximately 1.7cm from the front edge of the panel.
Page 10
Assembly Instructions Step 2 Fitting locking pins Screw Locking pins into the Right side panel , Left side panel and Center panel Insert locking pins Note: as far as shown. Do not over tighten.
Page 11
Assembly Instructions Step 3 Fitting dowels Insert Dowels Long dowel into Right middle panel ,Left middle panel ,Front Finished Finished bottom panel front edge front edge Back bottom panel Stop onto the Right Finished middle panel front edge Step 4 Attaching plastic supports Plastic supports...
Page 12
Assembly Instructions Step 5 Attaching right middle panel 2 people are need Note: back edge at this stage. Right middle panel onto the Center panel Step 6 Attaching front bottom panel Front bottom panel onto the Center panel...
Page 13
Assembly Instructions Step 7 Attaching back bottom panel bottom panel onto the Center panel Step 8 Finished Attaching back front edge support Insert Dowels into the Back support support onto the Center panel...
Page 14
Assembly Instructions Step 9 Attaching right side panel Position Right side panel onto the unit. Insert 5 Locking nuts in the Back support Right middle panel Back bottom panel and Front bottom panel Use a screwdriver to turn Locking nuts clockwise to lock.
Page 15
Assembly Instructions Step 11 Attaching left side panel Position Left side panel onto the unit. Insert 4 Locking nuts into the unit. Use a screwdriver to turn Locking nuts clockwise to lock. Step 12 Attaching top panel Door Stop onto the Top panel Finished front edge...
Page 16
Assembly Instructions Step 12 - continued Top panel onto the unit. back edge Step 13 Fixing back panels Apart the Ventilation holes covers rst. Attach Ventilation holes covers onto Large back panel Small back panel , comebine the covers. Continued on next page.
Page 17
Assembly Instructions continued back surface Attach Large back panel and Small back panel onto the unit using Nails Important: The unit MUST be ‘square’ when back is attached. Step 14 Large drawers assembly Screw Locking pins into 4 holes shown on back of the Large drawer front panel Note:...
Page 18
continued Fix Drawer right side panel onto the Large drawer front panel Insert 2 Locking nuts into the holes (they will only insert one way). Use a screwdriver to turn Locking nuts clockwise to lock. Insert 2 Locking nuts into the holes (they will only insert one way).
Page 19
Assembly Instructions continued Position Large drawer back panel onto the unit using Screws Repeat with remaining 1 large drawer. Step 15 Drawer assembly Screw Locking pins into 4 holes shown on back of the Drawer front panel Note: Insert Locking pins as far as shown.
Page 20
Assembly Instructions Step 15 - continued Insert 2 Locking nuts back surface into the hole (they will only insert one way). Use a screwdriver to turn Locking nuts clockwise to lock. Place a small amount of Glue into the grooves. Carefully slide the Drawer bottom panel into the...
Page 21
Assembly Instructions Step 16 Note: Wall plugs supplied are for solid wall only. Fixing to wall wall be used for your wall, seek professional advice if in doubt Warning: In order to prevent overturning, this product must be used with the wall attachment device provided.
Page 22
Assembly Instructions Step 17 Inserting drawers Slide the drawers fully onto the runners so the runners butt up against the back of the drawer front. Fix through drawer sides into the runners using Screws Slide the drawers fully onto the runners so the runners butt up against the back of the drawer front.
Page 23
Assembly Instructions Step 18 Attaching hinges to doors Fix 3 Door hinges onto the Doors using Screws Step 19 Hanging doors With help, slot Door hinges onto ‘hinge plates’. Tighten screw shown to lock hinges in position. Repeat opposite door. See ‘Hinge adjustment ’...
Page 24
Assembly Instructions Step 20 Hinge adjustment To move doors up or down: loosen screws shown and move doors to suit. Door Once doors are aligned, re-tighten Screws To move doors in or out: loosen screw shown and move doors to suit. Re-tighten screws.
Page 25
Assembly Instructions Step 20 - continued To move doors left or right: loosen screw shown and move doors to suit. Re-tighten screws. Door...
Page 26
Note : Before use allow the glue to dry for 24 hours and make sure the unit is secure. Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800...
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit.
Need help?
Do you have a question about the HOME New Pagnell 3 Dr 4 Drw Wardrobe 605/8788 and is the answer not in the manual?
Questions and answers