Download Print this page
Argos New Hallingford 274/4917 Assembly Instructions Manual

Argos New Hallingford 274/4917 Assembly Instructions Manual

3 drawer bedside

Advertisement

Quick Links

New Hallingford - 3 Drawer Bedside
Assembly Instructions -
More help is available throughout this booklet by scanning
Dimensions
Width - 37.5cm
Depth - 40cm
Height - 58cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Please keep for future reference
in the QR codes or typing in the links
274/4917
266/7379
266/4509
258/7693
266/2910
616/9749
618/4999
601/6737
620/9379
618/6959
MADE IN
BRITAIN
Issue 8 - 26/10/16

Advertisement

loading

Summary of Contents for Argos New Hallingford 274/4917

  • Page 1 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928.
  • Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 14kgs. space to layout the parts before recommend the Please lift with care. starting.
  • Page 3 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
  • Page 4 Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
  • Page 5 Assembly Instructions Step 1 Drawer Assembly www.youtube.com/watch?v=3fYL5zB6ZYQ Prepare the 3 drawer fronts Screw 2 metal dowels into the holes shown on the back of each drawer front Note: Tighten metal dowels up fully against the panels. Step 2 Prepare the drawer sides Insert a small locking cam nut...
  • Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
  • Page 7 Assembly Instructions Fixing Bottom Mounter Runners Step 8 https://www.youtube.com/watch?v=Z6lGMy19h7Q Fit runners to the drawers Runners must be pushed up against Turn the 3 drawer the drawer front assemblies over. Fit runner , marked with ‘DR’, to the bottom edge of the right drawer side , as shown, making sure that it is...
  • Page 8 Assembly Instructions Fixing Bottom Mounter Runners Step 10 https://www.youtube.com/watch?v=Z6lGMy19h7Q Prepare the left side Fit 3 CL runners to the left side screw The 1st screw uses the 1st hole in from the front of the runner. The 2nd and 3rd screws Finished use the holes that line front edge...
  • Page 9 Assembly Instructions Step 11 Prepare the right side Fit 3 CR runners to the right side The 1st screw uses Finished the 1st hole in from the front edge front of the runner. The 2nd and 3rd screws screw use the holes that line up with the other panel holes.
  • Page 10 Assembly Instructions Step 13 Fit the left side Push the left side onto the 2 rails Use a screwdriver to tighten the 2 large locking cam nuts fitted to the rails Plain chipboard Step 14 surface Prepare the top Screw 2 metal dowels into the top Shaped front edge...
  • Page 11 Assembly Instructions Step 16 Squaring up a Chest and tting the Back Panel www.youtube.com/watch?v=FeaI6541z7o Fit the back The measurement from top corner X to bottom corner X must be Square up the unit by equal to the measurement from top corner Y to bottom corner Y making sure that measurement x to x equals y to y.
  • Page 12 Side panel Drawer If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...