Mongoose TT1 Manual

Introduction
Thank you for purchasing our Car alarm system.
Mongoose TT1 is a modern car security system, designed and manufactured to ensure the
highest level of security for your car and provide you with a number of convenience features.
Please carefully read this manual and follow its instructions while using different features and
functions of the Mongoose TT1.
We are not responsible for any injuries or damages resulting from your wrong use of our
system.
Do not change the Installer's Functions while using the alarm system. These functions are
to be adjusted by professional installation staff, and to tailor the alarm system for reliable and
safety operation along with the different equipment installed on your car.
If you find any problems while using the alarm system, contact your installation shop for
repairing or re adjusting. Do not try to repair the alarm system yourself.
After reading this Guide you will be able to make good use of your alarm system and get as full
as possible protection for your car.
The Mongoose TT1 monitors the status of the doors, hood and trunk, two stage shock
sensor and the optional e.g. space disturbance sensor (if installed). A power siren, light
indicators, and a pager system (if installed) will warn you about any intrusion into your
car.
Enhanced anti theft facilities are ensured by a powerful built in blocking relay and an
additional universal output available to connect an extra blocking relay with either
normally closed or normally opened contacts. The Passive Immobiliser function and
programmable disarm authorization procedure are included to enhance the protective
abilities of the alarm system.
Variable functions of the inputs and outputs add flexibility to the installation procedure
and daily usage of the alarm system; optional sensors and other equipment can be
connected. Built in relays are used to connect high current circuits.
The alarm system allows adjustment through programming a number of features to
tailor the system to particular car and extra installed equipment.
The self diagnostics feature helps to identify and quickly remove all possible faults.
Remote Control
Transmitter
A miniature radio transmitter fed by a 3 volt battery (Type
CR2016). The case features three control push buttons and a
LED indicator. When any button is pushed, the transmitter
powers on and sends a coded command, which is executed by
the system. Transmitters continually alter the command
pattern according to a special algorithm, thereby preventing
any attempt to "crack" the alarm system by intercepting the
code (Antigrabber feature).
Car Alarm System MONGOOSE TT1.
key 1
key 2
key 3
1