Powering On The Switch - H3C S12500 Series Quick Installation Manual

Figure 19 Connecting the console cable

Powering on the switch

Verify that the power cord is connected to the power source, power on the switch, and verify that the LEDs
on the switch are normal.
Table 2 LED description when the switch is operating correctly
Module
MPU
Ethernet interface card
Switching fabric module
LED
SFC (red/green)
LC (red/green)
FAN (red/green)
PWR (red/green)
RUN (red/green)
RUN (red/green)
RUN (red/green)
14
Status
Flashing green
Flashing green
Flashing green
Flashing green
Flashing green
Flashing green
Flashing green