Table of Contents
Advertisement
INJECTION HAZARD
Fluid from the dispensing valve, leaks,
or ruptured components can inject fluid into your body and
cause extremely serious Injury, including the need for amputation. Fluid splashed in the eyes
or on
the skin can also cause serious injury.
0
Fluid injected into the skin may look like just a cut, but
it is a serious injury. Get immediate
medical attention.
0
Do not point the dispensing valve at anyone or at any part
of the body.
0
Do not put your hand or fingers over the end
of the dispensing valve.
0
Do not stop or deflect leaks with your hand, body, glove, or rag.
0
Use only extensions and no-drip tips that are designed for use with your dispensing valve.
0
Do not use a low-pressure flexible nozzle with this equipment.
Follow the Pressure Relief Procedure on page
8
if the dispensing valve clogs and before
cleaning, checking, or servicing the equipment.
. .
Tighten all fluid connections before operating the equipment.
D
Check the hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. Do
not repair high pressure couplings: you must replace the entire hose.
D
Fluid hoses must have spring guards on both ends
to help protect them from rupture caused by
kinks or bends near the couplings.
4AZARDOUS FLUIDS
ieath from splashing in the eyes, ingestion, or bodily contamination.
mproper handling of hazardous fluids or inhaling toxic fumes can cause extremely serious injury or
1
Know the specific hazards of the fluid you are using.
1
Store hazardous fluid in an approved container. Dispose of hazardous fluid according
to
all local,
state, and national guidelines.
1
Always wear protective eyewear. gloves, clothing, and respirator as recommended by the fluid
and solvent manufacturer.
308-485
3
Advertisement
Table of Contents
