Advertisement
hobiecat.com
Hull Assembly
1
Place a few drops of Loctite on the crossbar bolts and
attach the crossbars to the hulls. Make sure the bolt
caps are underneath the bolts when installing. LOOSELY
THREAD EVERY BOLT IN PLACE. DO NOT TIGHTEN UNTIL
ALL BOLTS HAVE BEEN STARTED.
2
Place bow spreader on
hull and thread in the
bridle bolts through the
hole at the ends of the
bow bar and into the hull.
3
Once you have been able to get
the threads started on all of the
crossbar bolts and bridle bolts,
tighten them all down.
Assembly Required | 9
Advertisement
