Advertisement
hobiecat.com
Wire Assembly
1
Connect the two ends of the bridles
together with one of the smaller
shackles. Place a drop of Loctite on the
pin threads and insert the shackle pin
through the forestay adjuster. Tighten
with pliers. Place the second shackle
in one of the holes on the adjustment
portion of the forestay adjuster.
2
Using the provided clevis pin and ring,
connect the other end of the bridle
wires to the bridle bolts.
SO THE BRIDLE BOLT CAN PIVOT
PROPERLY, MAKE SURE THE BOLD
BRIDLE BOLT IS ROTATED AS SHOWN
HERE.
Assembly Required | 17
Advertisement
