Hobie T1 Manual page 13

hobiecat.com
Main/Jib Sheet Installation
1
Route the jib sheet through the cleats on the forward crossbar per the diagram
below.
2
Feed the end of the jib sheet
line through the snap hook and
tie a knot at the end of the line.
3
Attach the mainsheet to
the traveler car by passing
the clevis pin through the
shackle on the mainsheet
block, holding it in place
with the clevis pin.
4
Route the mainsheet line through the
traveler cleat on the rear crossbar, then
the traveler car, and through the padeye
on the rear of the beam. Tie a knot at
the end of the line to hold the line to the
crossbar.
Assembly Required | 13
Main Sheet
Main sheet