Setting Of Warning Sign For Safety; Measuring Equipment; Moisture Protection; Operation After Power Failure - Alpha ESS SMILE-BAT-10.3P Installation Manual

Installation and maintenance reference to this installation and maintenance manual.
Do not expose to sparks or flame
Keep out of reach of children
The product must not be disposed of in household waste;
Dispose of it through environmentally friendly collection centres.
Setting of Warning Sign for Safety
During installation, maintenance or repairs, to prevent incorrect operation or accident due
to unrelated nearby personnel, the following precautions should be followed:
•
Obvious signs should be set at front switch and rear-level switch in case of
accidents caused by false switching.
•
Warning signs or tapes should be set near operating areas.
•
The system must be reinstalled after maintenance or operation.
Measuring Equipment
For ensuring the electrical parameters to match requirements, related measuring
equipment are required when the system is being connected or tested.
Ensure that the connection and use matches specification in case of electric arc or shock.
Moisture Protection
It is very likely that moisture may cause damages to the system.
Repair or maintenance activities in wet weather should be avoided or limited.
Operation After Power Failure
The battery system belongs to energy storage system, and it keeps fatal high voltage even
the DC side is disconnected. Therefore, touching the output of the battery is strictly
prohibited.
The Inverter maintains fatal voltage even both the DC or AC side are disconnected, so it
must be tested by multimeter for safety before operation.
______________________________________________________________________
Introduction
Alpha ESS Co., Ltd.
Your Smart Energy
Page 7 of 42