PACKING LIST SMILE5-BAT 6 x M8*60 6 x M5*10 6 x M4*10 2 x Mounting Panel 2 x Power Cable 1 x User Manual 6 x M6 Gasket Battery Communication Cable (1 black, 1 red) 1 x Quick Installation Manual...
Page 3
SECURING BATTERY Step3 Step4 Unscrew the corner screws and remove the top cover of the battery. Connect the power cable at the top of the bottom battery and close the battery front cover. For the new version battery please connect the power cables directly.
INSTALLATION & WIRING Step7 Step8 Remove the debris baffle and secure the battery to the wall To install another battery repeat Step 1 ~7. with screws. 4 x M8*60 4 x M8*60 BAT1 BAT2 Step9 Step10 Connect the communication cable from the inverter to the battery. Connect the two batteries at the side.
WIRING CONFIGURATION with SMILE5-INV Step11 Step12 Connect the power cables from BAT2 to BAT1. Connect the power cables from BAT1 to inverter. Red - Red Black - Black Black - Black Red - Red DIP SWITCH Step13 Open the front panel of the farthest Please install extra battery from the inverter and remove batteries only by the...
Page 6
CONFIGURATION with GOODWE INVERTER GoodWe (EM, ES, SBP series) The communication cable between INV and BAT is 2. If there are two or more than two BAT, DIP switch not regular net cable, it should be as below: of BAT should be as below: Battery DIP 1 DIP 1...