Parts List - Alpha ESS SMILE-BAT-10.3P Installation Manual

Ø Do not mount the inverter and the battery pack in areas containing highly flammable
materials or gases.
Ø If moisture has penetrated the system (e.g. due to a damaged enclosure), do not install or
operate the system.
Ø Do not move the system when it is already connected with battery modules.
Ø Secure the system to prevent tipping with restraining straps in your vehicle.
Ø The transportation of AlphaESS SMILE-BAT-10.3P must be made by the manufacturer or
an instructed personal. These instructions shall be recorded and repeated.
Ø A certified ABC fire extinguisher with minimum capacity of 2kg must be carried along when
transporting.
Ø It is totally prohibited to smoke in the vehicle as well as close to the vehicle when loading
and unloading.
For the exchange of a battery module, please request for new hazardous goods packaging
Ø
if needed, pack it and let it be picked up by the suppliers.
Ø In case of contact with electrolyte, rinse the affected areas immediately with water and
consult a doctor without delay.
CAUTION:
Risk of injury through lifting or dropping the system.
The battery is heavy. There is risk of injury if the battery is lifted incorrectly or dropped during transport
or when attaching to or removing from the wall.
Ø Lifting and transporting the inverter and battery must be carried out by more than 1 people.
Parts List
6 x M8*60
______________________________________________________________________
Introduction
SMILE - BAT-10.3P
6 x M5*10 6 x M4*10
Alpha ESS Co., Ltd.
Your Smart Energy
2 x Battery Bracket
Page 9 of 42