Alpha ESS SMILE-BAT-10.3P Installation Manual page 27

while maintaining:
•
Related safety standards and specifications should be followed in operation and
maintenance.
•
Disconnect all the electrical connections so that the equipment would not be
powered on.
•
Wait at least 5 minutes after disconnection in case that the residual voltage of
capacitors down to safe voltage. Use a multimeter to ensure the equipment is
completely uncharged.
•
The equipment should be repaired by professional staff and it is strictly for-
bidden for maintenance staff to open equipment on their own.
•
Appropriate protective measures should be taken while maintaining, such as
insulated gloves, shoes, and anti-noise ear plugs.
•
Life is priceless. Make sure no one would get hurt first.
•
The batteries need to be charged to 30%~50%SOC rate when the whole sys-
tem is static (that is, the batteries has not been charged for two weeks or longer)
for a long time, in case of over discharge.
Please contact us in time if there are any conditions that could not be explained in the
manual.
8. Appendix
Safety Datasheet
Issue Date: 25 th May 2019
SECTION 1. IDENTIFICATION
Product Identifier
Product Name:
Models:
Other Means of Identification
SDS #:
Synonyms:
______________________________________________________________________
Appendix
Revision Date: 25 th May 2019
Rechargeable Lithium-ion Battery
SMILE-BAT-10.3P
SDS010
Lithium Iron Phosphate (LiFePO4, LFP)
Alpha ESS Co., Ltd.
Your Smart Energy
Version: V01
Page 25 of 42