Page 2
SMILE5-BAT 6 x M8*60 6 x M5*10 6 x M4*10 2 x Hanging hook 2 x power cord 8 x M6 washer 1 x manual (1 black, 1 red)
Page 3
Disassemble the battery packaging and battery installation Open the battery pack. Use a Phillips screwdriver to attach the battery mounting hooks to the battery top cover. Explosion-proof valve M5*10 1-2 Explosion-proof valve position Place the battery close to the wall perpendicular to the floor and drill holes in the wall using the impact drill Note: Please place a protective...
Page 4
Battery fixing and wiring Step4 Step5 Remove the debris shutter and secure the battery to the wall with the Connect the battery and inverter using the power cord (red) in the screws. parts list. M8*60 M8*60 Wiring Step6 Step7 Connect the battery and Take off the battery decorating panel and remove the inverter using the power communication wiring barrier on the left side.