Table of Contents
Advertisement
3.8 Default view
Default view shows normally the actual room tempe-
rature and the active output and current operation
mode.
The confi guration device will return to this view au-
tomatically.
To enter the main menu, press the SELECT button.
3.9 Main menu
The main menu has the following menu selections:
"ROOM"
Times and measure values (sub meny)
"TIMER"
Timer function
"DAY"
Day mode set-point
"NITE"
Night mode set-point
"SAVE"
Save mode set-point
"W.PRO"
Settings menus (sub menu, the text
"W.PRO" and number "1" may differ
depending on which menu that was last
displayed, before going back to default
view).
3.10 Timer and measure values menu
This sub menu has the following selections:
"ROOM"
Actual room temperature
"MON"
Day and time
"DATE"
Month and date
"Y:W"
Year and week number
"%OUT"
Output signal power, in percent to
outputs
To jump between different menu views press the UP
and DOWN buttons. All values in the menu "Timer and
measure values" can be changed except week number
and "%OUT". Press the SET button and one of the
values starts to blink. To change the value press UP or
DOWN buttons. To jump to the next value press the
SET button. The clock can be set, but the controller can
not store the clock settings at voltage failure.
Time and date will be reset at voltage failure.
2009-05-22
Room temperature
22.0
°C
ROOM
Room temperature
22.0
°C
ROOM
Timer settings
0:00
TIMER
Day set-point
22.0
°C
DAY
Night set-point
22.0
°C
NITE
Save set-point
22.0
°C
SAVE
Menu 1
Week program
MENU
1
W.PRO
Room temperature
22.0
°C
ROOM
Clock
16:00
MON
Month and date
01:01
DATE
Year and week
01:01
Y:W.
Heat and cool.
output power
HEAT
COOL
100
% OUT
www.swegon.com
16
Advertisement
Table of Contents
