The Buttons; The Display Symbols; Menu Navigation; Changing Values - Swegon LUNA c RE Manual

Room temperature controller and configuration device
Table of Contents

Advertisement

3.3 Buttons
The picture to the right shows the different function
buttons placement on the confi guration device. All the
functions and settings are available directly with the
confi gutation device's buttons.
Button functions:
SELECT
=
select menu at main menu
SET
=
select value to be changed
UP
=
increase a value, or move to next
menu or function
DOWN
=
decrease a value, or move to next
menu or function
A
=
Sets the confi guration device to
LOCAL MODE
B
=
Sets the confi guration device to
READ MODE.
Transfers all the settings from the
controller to the confi guration
device.
C
=
Sets the confi guration device to
WRITE MODE.
Transfers all the settings from the
confi guration device to the
controller.
3.4 Display symbols
The display has a text fi eld, a numeric fi eld and different
symbols. The text fi eld shows brief explanaitions
of which menu you are about to enter, och the value
you are about to change in the numeric fi eld.
The symbols different functions:
1. Sun
=
day operation mode
2. Moon
=
night operation mode
3. Sun + moon =
save operation mode
4. HEAT
=
heating output active
5. COOL
=
cooling output active
6. Tool
=
Indicates that you are at a
menu that can be confi gured.
7. MENU
=
indicates that you are at
the main menu, or at a top
of a menu view.
Confi guration device.
Operation
mode
Text fi eld
Display.

3.5 Menu navigation

To go forward in steps in the main menu, press the SELECT
button. Every menu choise has different functions and they
are described in this manual. Some menu choises are built
up as sub menus, where you can enter them by pressing
the UP or DOWN buttons
3.6 Change values
To change a value, press the UP or DOWN buttons. If there
are more than one value to be changed, you can select the
value you want to change by pressing the SET button. One
of the values starts to blink, and to change that value press
the UP or DOWN buttons. To jump to the next value, just
press the SET button again.
2009-05-22
Ouput
Tool
Numeric fi eld
www.swegon.com
Menu
symbol
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Luna b t-cu

Table of Contents