Electrical Connection; Preparing The Signal And Excitation Current Cable - ABB FXE4000 Commissioning Instructions

3.4

Electrical connection

3.4.1

Preparing the signal and excitation current cable

Cut to length and terminate the cable as shown.
Note
Use wire end sleeves.
Fig. 16
Transmitter side
Fig. 17
1 Measurement potential, yellow
2 white
3 Electrode signal line, red
Note
The shields may not touch (signal short circuit).
D184B133U04 FXE4000 (COPA-XE/MAG-XE)
Flowmeter primary side
4 Electrode signal line, blue
5 SE clamp (shield)
Installation
EN - 15