SINGULARITY COMPUTERS SPECTRE 2.0 Assembly Manual page 2

IMPORTANT: Spectre Warranty
Thank you for your purchase, we look forward to seeing what you do with our creation. Spectre
2.0 introduced a number of new technologies and ideas. With this product we have pioneered
liquid cooling integration using a production CNC machined manifold. Anything new requires
education and there is an adjustment period.
Spectre 2.0 has a 2-year limited warranty.
Welcome to Singularity Computers and your new Spectre 2.0! We look forward to seeing what
you create.
1: The Integrated Liquid Cooling System is pressure tested at the factory, so there is no need to
adjust the fasteners on the manifold. Take care not to over tighten any fasteners on the acrylic.
As soon as you feel any significant feedback or tension go no more than 1/4th of a turn past it.
On the metal parts you can tighten normally. We are not responsible for damage caused by
over-tightening the fasteners.
2: Any thread stripping, cross threading or thread damage of any kind will not be covered under
our warranty. All threads are pre-tested. We use stainless steel fasteners which are extremely
tough.
3: All acrylic is carefully checked for scratches, marks or particles as the manifold is assembled.
We are not responsible for mistreatment of the acrylic. Only clean with a microfiber cloth and
use nothing except distilled or deionized water for cleaning, or Novus Plastic Cleaner. Damage
caused by cleaning agents (particularly alcohols or solvents) is not covered under warranty.
4: Acrylic Surface Guarantee: Marks on acrylic which cannot be wiped away with a microfiber
cloth will only be covered under warranty under the following conditions: That they did not
occur after the item was shipped from the Singularity Computers Factory or Retailer. If there are
more than 10 marks which are beyond 5mm in length and visible when facing perpendicular to
the surface. Evidence of this must be photographed in detail and photographs must be taken
perpendicular to the surface. Marks must be easily visible in photographs; subtle marks will not
be covered.
5: For the latest coolant recommendations please visit http://bit.ly/sc-important-info. We are
not responsible for staining of the acrylic, but it has never been an issue with our products.
Most staining will be easy to remove by flushing out the loop with distilled water for 24hrs or
using Mayhems Blitz. If you are concerned about staining then we suggest Mayhems Non-Stain
Dyes.
6: Any damage which occurs after the item leaves the Singularity Computers Factory or our
Retailers is not covered under warranty. We are not responsible for shipping damage or
mishandling.
Spectre | Assembly Manual
1