Removing The Crispers And Crisper Cover; Changing The Light Bulb; Reversing The Door Swing - Whirlpool ET180K Use & Care Manual

Pull
out to the stop,
lift the front
thentheback. . UJ
Removing the crispers and crisper cover
To remove the crispers:
1. Slide crisper straight out to the stop, lift front,
then slide the rest of the way out.
2. Replace in reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame and remove cover
support.
3. Lift out cover frame by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator, then lower into place.
2. Replace cover support with the long tab toward
the front.
NOTE: If the support needs adjustment, turn
base clockwise to raise or counter-clockwise
to lower.
3. Slide back of glass insert into place, then
lower front.
Changing the light bulb
Electrical Shock Hazard
Before removing the light bulb, either
unplug the refrigerator or disconnect the
electricity leading to the refrigerator at the
main power supply. Shock and injury can
occur if electricity remains connected.
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find bulb.
3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
Reversing the door swing
You can change the hinges on your refrigerator
so the doors open the other way. You will need a
Phillips head screwdriver. Refer to the instruction
sheet included with your refrigerator.
7