Exterior Moisture Control; Adjusting The Refrigerator Shelves; Moving The Meat Drawer And Cover - Whirlpool ET180K Use & Care Manual

Using Your Refrigerator
Continued
EXTERIOR MOISTURE CONTROL
4 OFF .nhl b
\Insnv -
Glass shelves are
heavy. Be careful.
Pull out to the stop, lifl the
front and pull again.
Exterior moisture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the
shelf supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Moving the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up, lift at back, and pull
straight out.
2. Replace in reverse order.
6