Networks Combinations - Sony PXW-Z280 Setup Manual

3 Select Network > Wired LAN > Detail Settings in the setup menu.
4
Select whether to obtain an IP address automatically via DHCP or set the IP address manually, and
select whether to obtain DNS automatically or set DNS manually.
5 Select the Set button on the menu screen, and press the SEL/SET dial or SET button.
When the connection is successful, the LAN icon appears.
If you experience any difficulty, see

5.3.4. Networks Combinations

You can use a wireless LAN and modem, and wireless LAN and wired LAN network interfaces
simultaneously.
The following table shows the settings for the use of each interface for network client mode, streaming,
and file transfers.
Modem1 Modem2
ON ON
ON ON
ON OFF
ON OFF
OFF ON
OFF ON
"12.1.3. Wired LAN"
Wired LAN Wireless LAN
OFF ON
OFF OFF
OFF ON
OFF OFF
OFF ON
OFF OFF
in the Troubleshooting section.
Operation
Dual Link: Uses Modem1 and Modem2.
Single Link: Uses Modem1.
Wireless LAN can be used for remote control.
Dual Link: Uses Modem1 and Modem2.
Single Link: Uses Modem1.
Dual Link: Uses Modem1 and Wireless LAN.
Single Link: Uses Modem1.
Dual Link cannot be used.
Single Link: Uses Modem1.
Dual Link: Uses Modem2 and Wireless LAN.
Single Link: Uses Modem2.
Dual Link cannot be used.
Single Link: Uses Modem2.
26