Measures for preparation
4.3 Storage
NOTICE
!
Risk of regulator damage due to improper
storage.
− Observe the storage instructions.
− Avoid long storage times.
− Contact SAMSON in case of different stor-
age conditions or long storage periods.
Note
We recommend regularly checking the de-
vice and the prevailing storage conditions
during long storage periods.
Storage instructions
Protect the device against external influ-
–
ences (e.g. impact).
Do not damage the corrosion protection
–
(paint, surface coatings). Repair any
damage immediately.
Protect the device against moisture and
–
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con-
densation. If necessary, use a drying
agent or heating.
Make sure that the ambient air is free of
–
acids or other corrosive media.
Observe the permissible ambient tem-
–
peratures (see section Table 1).
Do not place any objects on the device.
–
24
Note
SAMSON's After-sales Service can provide
more detailed storage instructions on re-
quest.
EB 2171 EN