Contents Contents Design and principle of operation Installation Operation Maintenance Replacement Troubleshooting Description of the nameplate Customer inquiries Dimensions and weights EB 3126 EN...
Page 3
The declaration of conformity can be viewed and downloaded on the Internet at http://www.samson.de. For appropriate operation, make sure that the regulator is only used in appli - cations where the operating pressure and temperatures do not exceed the op - erating values based on the valve sizing data submitted in the order.
Operation 3 Operation 4 Maintenance Replacement 3.1 Start-up 3.2 Set point adjustment Caution If you intend to carry out any work on the differential pressure regula- tor, you are required to remove the device from the pipeline. For this purpose, first allow the relevant sec- tion of the plant to cool down in case of high temperatures.
Page 7
Maintenance Replacement 4.1 Cleaning or replacing the plug Caution! The springs are pre-loaded. Take proper precautionary measures or, if necessary, make a disassembly tool. 4.2 Replacing the diaphragm Caution! The springs are pre-loaded. Take proper precautionary measures or, if necessary, make a disassembly tool.