Samson 43-1 Mounting And Operating Instructions page 12

Safety instructions and measures
1.3 Notes on possible property damage
NOTICE
!
Incorrect control due to the formation of ice on the regulator.
Medium temperatures below 0 °C may cause ice to form on the regulator, depending
on the air humidity. This may affect, in particular, the functioning of the plug or control
thermostat stem guide.
Î Prevent the formation of ice by taking appropriate precautions (e.g. enclosure,
trace heater etc.). The plant operator is responsible for selecting and implementing
appropriate precautions. See section 6.2.4.
Risk of irreparable regulator damage caused by the regulator components being
taken apart.
The control thermostat is an inseparable hydraulic unit consisting of a thermostat, cap-
illary tube and temperature sensor. If these components are dismantled (e.g. removal
of the capillary tube), the regulator will be irreparably damaged and will no longer be
able to fulfill its control task.
Î Do not dismantle the regulator.
Î Only perform allowed activities on the regulator.
Î Contact SAMSON's After-sales Service department before replacing spare parts.
Note
SAMSON's After-sales Service can support you concerning lubricant, tightening
torques and tools approved by SAMSON.
12 EB 2171 EN