Samson 43-1 Mounting And Operating Instructions page 33

WARNING
!
Risk of burn injuries due to hot or cold com-
ponents and pipeline.
Valve components and the pipeline may be-
come very hot or cold. Risk of burn injuries.
− Allow components and pipelines to cool
down or heat up.
− Wear protective clothing and safety gloves.
NOTICE
!
Risk of valve damage due to incorrect servic-
ing or repair.
Service and repair work must be performed
by trained staff only.
NOTICE
!
Risk of regulator damage due to excessively
high or low tightening torques.
Observe the specified torques on tightening
regulator components. Excessively tightened
torques lead to parts wearing out quicker.
Parts that are too loose may cause leakage.
Observe the specified tightening torques.
NOTICE
!
Risk of regulator damage due to the use of
unsuitable tools.
Only use tools approved by SAMSON.
NOTICE
!
Risk of regulator damage due to the use of
unsuitable lubricants.
Only use lubricants approved by SAMSON.
EB 2171 EN
Note
SAMSON's After-sales Service can support
you concerning lubricant, tightening torques
and tools approved by SAMSON.
Note
The regulator was checked by SAMSON
before it left the factory.
− Certain test results certified by SAMSON
lose their validity when the valve is
opened. Such testing includes seat leakage
and leak tests.
− The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-sales
Service.
− Only use original spare parts by
SAMSON, which comply with the original
specifications.
Tip
SAMSON's After-sales Service can support
you in drawing up an inspection and test
plan for your plant.
Servicing
33