Advertisement
P/N 3124450_A
JOINING CASES -LEVEL CASE LINEUP
Merchandisers must be installed level to ensure
proper operation of the refrigeration system and
proper drainage of defrost water. When leveling
merchandisers, use a carpenter's level. Metal leveling
shims or wedges are provided in packout. Place shims
under the rail and make sure that they are positioned
at a base component (crossbar).
JOINING CASES WITH SOLID
PARTITIONS
Partitions are installed between individual cases
to prevent frost buildup and other issues that
might result from different defrost schedules and
operating temperatures. All joints must be air-tight
to prevent formation of ice or condensation. If a
partition is not needed for the case lineup, use joining
kit and instructions packed with the case(s).
Remove the following from cases:
(A) Bumpers, rails, packing materials, splashguards
from both cases.
(B) Shelves (if installed)
(C) Display racks and pans from ends to be joined.
(D) Rear shelf supports.
(E) Back panels from both cases by lifting up and our
near the bottom. No tools are necessary.
(F) Remove "J" molding from door frames next to
partition.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Approximately
Centered
Rear of Reach-in
Base Component
Shim Here
PARTS LIST SOLID
PARTITION
Item # Quantity
Description
1.
2
Donut Gasket (Ships with Case)
2.
1
Gasket 1 x ½ x 180"
3.
1
Gasket ½ x ¼ x 180"
4.
1
Partition Assembly
5.
7
Flat Washer
6.
6
Cap Screw
7.
1
Hex Head Lock Nut
8.
2
End 'J' Molding
9.
10
Shoulder Screw
RFL / RFM
RFLN / RFMN
Verify Nut Retainers are installed.
7
Base
Component
Shim Here
RFL / RFM
RFLN / RFMN
5
/
inches
16
5
/
-18 x 2½"
16
5
/
-18
16
Freedom Reach-in
Advertisement
